Programmable high/low setpoints with color
coded LED indicators and output signal for quick
go/no go testing
960 Data memory for recall and computer download
Clamps containers
from 1/2"~ 7" in diameter
lbf-in, kgf-cm, and N-cm units are push button selectable
RS-232C, Digimatic and Analog outputs
Both clockwise and
counterclockwise operation
Overload capacity 200% of
F.S.
Real time and peak mode (selectable)
Tare function
Overload alarm and output signal
Can be operated with internal rechargeable
battery or AC adapter
Imada’s cap torque tester offers programmable high/low setpoints for go/no-go
testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED
for over High setpoint.
Store up to 960 values in memory, which can be transmitted using the serial output. Use the real time mode to display
torque transients, or peak mode to capture the peak torque achieved during a test. Selectable measuring units of
lbf-in, kgf-cm, or N-cm.
Cap testers include AC adapter/charger and built-in NiCad rechargeable batteries and 1" high standard pegs (optional
long pegs available). A calibration kit is also available.
DTX Cap Torque Tester
Ranges
(Resolution) Accuracy:
±0.5% F.S.