| Force Measurement
Fixtures and Grips |
|
|
|
 
Swivel hooks specifically designed
to facilitate easier operator set-up when testing tension springs. Usually
used in conjuction with fixed test hooks.
| ØA |
Radius B |
Rated Up To |
Fixing Thread |
Part No. |
| 5mm (0.20in) |
9mm (0.35in) |
500N |
10/32 UNF |
ACC008-15 |
| 6mm (0.24in) |
7mm (0.28in) |
1000N |
10/32 UNF |
ACC008-14 |
Top
 
Designed for mounting small and miniature
tension springs.
| ØA |
B |
C |
Rated Up To |
Fixing Thread |
Part No. |
| 1.5mm (0.06in) |
30mm (1.18in) |
6mm (0.25in) |
50N |
10/32 UNF |
ACC008-96 |
Top
 
| ØA |
Radius B |
Rated Up To |
Fixing Thread |
Part No. |
| 3.2mm (0.13in) |
4mm (0.16in) |
50N |
10/32 UNF |
432-118 |
| 6mm (0.24in) |
7mm (0.28in) |
500N |
10/32 UNF |
432-120 |
| 6mm (0.24in) |
7mm (0.28in) |
2500N |
5/16 UNC |
432-122 |
Top
 
Designed to test the opening force
of flip caps.
| A |
B |
Rated Up To |
Fixing Thread |
Part No. |
| 25mm (0.98in) |
20mm (0.79in) |
100N |
10/32 UNF |
ACC008-302 |
Top
 
Used for holding smaller crimp terminals
for tests to BSI spec. BS5G178 PART 1 and equivalent international standards.
| A |
Max Jaw B |
C |
Rated Up To |
Fixing Thread |
Part No. |
| 5mm (0.20in) |
2mm (0.8in) |
56.1mm (2.21in) |
75N |
10/32 UNF |
ACC008-03 |
Top
| Hardened and Ground Compression
Plates |
 
For spring testing and general compression
tests.
| ØA |
Fixing Thread |
Part No. |
| 12mm (0.47in) |
10/32 UNF |
ACC008-92 |
| 19mm (0.75in) |
10/32 UNF |
ACC008-93 |
| 50mm (1.97in) |
10/32 UNF |
432-172-F95 |
| 70mm (2.76in) |
5/16 UNC |
406-010 |
| 100mm (3.94 in) |
5/16 UNC top MWD TOP |
406-046 |
| 100mm (3.94in |
5/16 UNC bottom Fits MWD Base
Plate |
406-047 |
Top
| Nickel Plated Compression
Plates |
For general compression tests.
| ØA |
Fixing Thread |
Part No. |
| 12mm (0.47in) |
10/32 UNF |
432-119 |
| 19mm (0.75in) |
10/32 UNF |
432-121 |
| 19mm (0.75in) |
5/16 UNC |
432-125 |
| 50mm (1.97in) |
10/32 UNC |
ACC008-06 |
| 50mm (1.97in) |
5/16 UNC |
ACC008-108 |
Top
| Black Finish Compression Plates |
 
For general compression tests.
| ØA |
Fixing Thread |
Part No. |
| 175mm (6.89in) |
5/16 UNC |
432-152 |
Top
| Vented Compression Plates |
 
Allows air-release during top-load
testing. For use with tests to ASTM D2659.
| ØA |
Fixing Thread |
Part No. |
| 50mm (1.97in) |
10/32UNF |
406-196-F96 |
Top
| Self Levelling Compression
Plates |
 
Self levelling compression plates
allow parallelism to be set for accurate spring testing. Hardened and
Ground. Supplied for either top or bottom use.
10/32 or 5/16 fixing thread available.
| ØA |
DIAGRAM |
Part No. |
| 50mm (1.97in) |
1 & 2 |
ACC008-95 |
| 100mm (3.94in) |
1 |
ACC008-951 |
| 175mm (6.89in) |
1 |
ACC008-952 |
Top
|
