There are three versions of the Dillon Model X Force Gauge. Model X-C
measures compression.Model X-ST measures tension. Model X-PP is
the push-pull version which measures both tension and compression.
Capacities available from 0-25 pounds to 50,000 pounds.
The Dillon Model U is a slimline version force gauge designed for compression
measurement in limited space. It can be hand-held or permanently
mounted on a surface plate or in test fixtures. It is available
in nine capacities from 25 pounds to 10,000 pounds. Also in seven
kilogram capacities.
Download the:
Mechanical Force Gauge Brochure PDF
Mechanical X-Force Gauge Price List PDF
Mechanical U-Force Gauge Price List PDF
 Model
X-C Force Gauge with compression calibration
Model X-C comes in eleven
capacities ranging from 25 lb to 50,000 lb or 10 kg to 20,000
kg. All feature accuracy of ±1% of full capacity, except
the 25,000 lb and 50,000 lb (10,000 kg and 20,000 kg) capacity
instruments which are accurate to ±2% of full capacity.
Model X-C is available in lb,
kg or Newton capacities.
Top
 Model
X-ST with tension calibration
Dillon offers the Model X-ST
in nine capacities from 25 lb to 10,000 lb or 10 kg to 5,000 kg.
Accuracy is ±1% of full range. (Note: For applications
requiring capacities beyond 10,000 lb or 5,000 kg in tension,
consider the Dillon Dynamometer.)
Tension Force Gauges in capacities
through 2,000 lb (1,000 kg) are supplied with two rod-end connectors.
5,000 lb and 10,000 lb (2,000 kg and 5,000 kg) capacities are
equipped with convenient shackles and pins.
Model X-ST is available in lb,
kg or Newton capacities.
Top
 Model
X-PP with compression/tension calibration
Force gauges calibrated in push-pull
are available in seven capacities in lb ranging from 50-0-50 to
5,000-0-5,000 and four metric capacities from 50-0-50 to 1,000-0-1,000
kg. Newton calibration is also available. Accuracy is ±2%
of maximum dial reading (based on total capacity of both compression
and tension scales).
Model X-PP gauges in capacities
up to and including 1,000-0-1,000 lb or 500-0-500 kg are supplied
with a set of self-aligning spherical rod-end connectors for tension
loading. Force is applied to connectors through a hardened steel
pin which must be a slip fit in connector holes.
2,500-0-2,500 lb and 5,000-0-5,000
lb and 1,000-0-1,000 kg capacity gauges are equipped with two
shackle adapters, shackles and pins. Shackles must be removed
when compression load is involved. Force is then applied against
shackle pins in a suitable test setup.
All push-pull gauges are supplied
with a compression-loading spherical ball fitting for compression
loading.
Top
 Model
U Force Gauge
Slim line design for added versatility
The Model U Force Gauge is an
accurate (±1% of full range) mechanical compression measurement
instrument. Its slim line design has repeatedly proven valuable
in installations where space is at a premium.
The versatility of this simple
instrument is demonstrated by the fact that it can be used as
a hand-held device, permanently mounted on a flat surface plate
or used in test fixtures.
U Force Gauges are available
for measurement in lbs, kgs or Newtons. There are 9 lb capacities
ranging from 25 lb to 10,000 lb. The 7 kg capacities range from
10 kg to 5,000 kg.
On light capacity models (25
lb to 250 lb or 10 kg to 100 kg), you can choose between flat
bottom and recessed design.
Dillon also offers high capacity
gauges with lb capacities 500 to 10,000 lb and metric capacities
from 500 kg to 5,000 kg. High capacity gauges all have flat bottom
design and each includes one pressure fitting of your choice.
Top
Options include:
- Maximum load pointer which
remains at peak load until manually reset. (Not available on
the Model X-PP)
- Zero position on dial may
be factory positioned at 12, 3, 6, or 9 o'clock. Standard position
is at 12 o'clock.
- Shock-less dial indicator
for installations involving the sudden application or release
of force. (Maximum pointer cannot be supplied with shock-less
dial indicator.)
|
Push/Pull
Mechanical Force Gauge