Specifications
Power Input:
115 VAC, 500 mA 50/60 Hz single phase
230 VAC, 250 mA 50/60 Hz single phase
Optional 10-32 volts DC and AC above
Excitation:
10 volts DC or 10 volts AC square wave capable of
driving up to twenty 350-ohm load cells.
Operational Keys:
Zero, Peak Reset, Send Data, Units, Select, 0-9,
Decimal Point, Clear, Enter, Escape, and five Soft
Keys labeled per the selected operational routine.
Display:
1 inch by 4.3 inch vacuum fluorescent graphic dot
display (32 x 128 dot layout)
A/D Conversion Rate: 60 times per second
Units of measure:
Pound-force, ounce-force, Newton, kilogram-force,
gram-force, and two selectable custom units.
Capacity Selections: Up to 10,000,000
Displayed Resolution: Up to 1 part in 100,000
Audio Output:
Audio tone for key contact assurance and operational
alarms
Time and Date: Battery protected real-time
clock
Internal Resolution: 1,000,000 counts
Load cell linearization: 10 points per load
cell
Standard Input and Outputs:
Communication choices:
Com 1: RS232, RS485/422
Com 1: RS232, 20 mA current loop
Two setpoint I/O ports via OPTO 22 I/O modules
Available Options:
Multi-scale input card for a total of 8 inputs
(five available external connectors)
10 to 32 VDC operation, 3.5 amp
OPTO 22 I/O modules
Alphanumeric, PC-style keyboard
Operating Temperature:
14° to 104°F (10° to 40°C) at 10
to 90% relative humidity
Enclosure: Stainless steel NEMA 4 enclosure
Dimensions:
12.4 H x 12.8 W x 6.3 D
(31.4 cm x 32.5 cm x 16.0 cm)
Weight: 18 lb. (8 kg)
|
[Dynamometers]
[Force Gauges] [Torque
Measurement] [Load Cells] 
